Daewoo MUSSO Service Manual page 928

Adjustment Procedure
1. Pedal Height
Height (A)
Notice
If pedal height is not in specified value, loosen the stop
lamp nut (B) and adjust the pedal height.
2. Pedal Stroke
Stroke (C)
Notice
If pedal stroke is not in specified value, loosen the stop bolt
and lock nut (F) and adjust the pedal stroke.
3. Free Play
Free Play (E)
Notice
To adjust, depress the brake pedal several times until there
is no more vacuum left in the vacuum line.
To adjust, loosen the lock nut (D) of the push rod and turn
the rod.
Inspection Procedure
1. Inspect the wear of bushing.
2. Inspect the warp and bend of brake pedal.
3. Inspect the return spring of brake pedal.
4. Inspect the conductivity when connecting the tester to the
stop lamp switch connector.
150 mm (From the carpet)
Mando : 138 mm
PBR : 132mm
1 - 4 mm
HYDRAULIC BRAKES 4A-11