Daewoo MUSSO Service Manual page 1242

TOD CONTROL UNIT
TOD Electric Characteristics
Voltage
Parasitic Current
(Under max. operation Voltage)
Max. Operation Current
(Under max. operation Voltage)
Removal & Installation Procedure
1. Turn the ignition switch to "OFF" position.
2. Remove 30 pin connector from TOD control unit.
3. Unscrew 2 bolts (1).
Installation Notice
Tightening Torque
4. Installation should follow the removal procedure in the
reverse order.
Notice
When replace TOD control unit, it is required to make a
coding correspondent with vehicle specification.
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
CAN communication Operation Range
9 - 11 Nm
TRANSFER CASE (TOD) 5D2-33
Normal Operation Range
Ignition "OFF"
Ignition "ON"
Motor "OFF"
Motor "ON"
1 Bolt (M6 x 16, 2pieces) ................ 9-11 Nm
2 TOD control unit
9 - 16 Vdc
6 - 16 Vdc
2 mA
1 A
7 A
20 A