General Description - Daewoo MUSSO Service Manual

8A-4 SEAT BELT

GENERAL DESCRIPTION

AND SYSTEM OPERATION
DRIVER SEAT BELT WARNING
The driver's safety belt incorporates a safety belt reminder
light in the instment cluster remind the driver if the safety belt
is not fastened when the ignition is turnd ON.
OPERATION AND FUNCTIONAL
CHECKS
Caution:
Keep sharp objects and potentially damaging objects
away from the seat belts.
Avoid bending or damaging any portion of the buckle
or the latch plate.
Do not bleach or dye the belt webbing. Use only mild
soap and water in order to clean the belts.
When installing the seat belt anchor bolts and the
screws, start the bolts and screws by hand in order
to prevent crossthreading.
Do not attempt any repairs on the retractor
mechsemblies with new assemblies.
Replace any belts that are cut r damaged in any way.
1. Inspect all saet belt anchor bolts and the screw in order to
verify that they are secure.
2. Inspect the seat belt buckle. The buckle must lock and
unlock easily.
3. After inserting the latch into the buckle, tug sharply on the
belt. The buckle must remain locked.
4. Fully extend the shoulder belt portion to make sure that
there is no twisting or tears in the belt.
5. Let the shoulder belt retract fully. The belt should retract
easily.