Table of Contents
Advertisement
Removal & Installation Procedure
1. Hold the bolt pulley with counter holder and remove the
bolt(4).
Installation Notice
Tightening Torque
2. Remove the socket bolt(5) and then remove the cooling
fan(3) and fan clutch(2).
Notice
Keep the fan clutch vertically.
Installation Notice
Tightening Torque
3. Installation should follow the removal procedure in the
reverse order.
Counter Holder 603 589 00 40 00
45 Nm
10 Nm
OM600 ENGINE COOLING 1D3-11
Advertisement
Chapters
Table of Contents
