Inspection Of Components - Daewoo MUSSO Service Manual

5B-40 MANUAL TRANSMISSION

INSPECTION OF COMPONENTS

Inspection Procedure
1. Clean all parts with solvent and dry them with compressed
air. Check the following parts for cracks and damaged
sealing surfaces.
Case
Extension housing
Shift Cover
Input bearing retainer
Counter shaft rear bearing retainer
2. Check the parts which support bearings and shafts for
excessive wear and replace them if necessary.
3. Check the bearing surfaces of the following parts ;
Input shaft
Main shaft and its gears
Counter shaft and 5th drive gear
4. Check the reverse idler shaft and its gears.
Notice
Replace excessive wear parts and do not file on the
hardened surface and precision ground.