Daewoo MUSSO Service Manual page 433

Tools Required
001 589 32 21 00 Dial Gauge
Commercial Tool
Valve corn grinding machine
Checking and Machining
1. Clean the valves and do visual check.
Valves with wobbled valve disc, with worn or scored valve
stem should be replaced.
2. Measure valve disc height 'h'.
Service data
3. Machine the valve.
Notice
Pay attention to setting angle 'a'.
4. Measure radial runout between valve stem and valve seat.
Limit
Intake 1.7 ± 0.15 mm
Exhaust 1.7 ± 0.15 mm
Max. 0.03mm
Dial Gauge 001 589 32 21 00
OM600 ENGINE MECHANICAL 1B3-129