Daewoo MUSSO Service Manual page 1206

5D1-34 TRANSFER CASE (PART TIME 4408)
External Electric Shift
1. Align the motor with shift shaft and position the motor
assembly onto the cover.
2. Install the motor to the shift shaft and contact cover androtate
the motor clockwise direction to check correctengagement.
3. Insert the 0-ring on the speed sensor speed sensor
assembly to the cover.
4. Install the bracket to the motor assembly and tighten 3bolts.
Tightening Torque
6 Bolt
7 Washer
8 Bolt
9 Sensor and Harness Bracket
10 Sensor Assembly
14 Speed Sensor
12 O-ring
13 Motor Assembly
25 Cover
8 -11 Nm
13 Motor Assembly
103 Shift Shaft