Self-Diagnosis Test - Daewoo MUSSO Service Manual

5D1-8 TRANSFER CASE (PART TIME 4408)

SELF-DIAGNOSIS TEST

Test Procedure
1. Connect the scanner harness connector to the engine
compartment diagnosis socket.
2. Turn the ignition switch to "ON" position.
3. Select "Electronic control vehicle diagnosis" from the function
selection display and press "Enter".
4. Select "Musso" from vehicle model selection display and
press "Enter".
5. Select "TCCU" from control system selection display and
press "Enter".
6. Select "TCCU Part Time" from TCCU diagnosis selection
display.
Notice
Check sensor valve output display if necessary.
7. Select "Self-diagnosis" from diagnosis items selection display.
8. Turn the ignition switch to "OFF" position and press
"ENTER". Turn the ignition swtich to "ON" position again
and press "ENTER".
9. Determine fault code and check the defective component.
Notice
Refer to self-diagnosis list.