Daewoo MUSSO Service Manual page 948

Removal & Installation Procedure
1. Remove the eye-hose bolt and disconnect the hose.
Installation Notice
Tightening Torque
2. Unscrew the mounting bolts and remove the brake caliper
assembly.
Installation Notice
Tightening Torque
3. Pull out the brake pads. Replace pads if necessary.
Notice
Always change the all pads on one wheel at a time.
4. Installation should follow the removal precedure in the
reverse order.
5. Bleed the air from the system.
15 - 18 Nm
85 - 105 Nm
REAR DISC BRAKES 4E-3