Daewoo MUSSO Service Manual page 1193

<Electric Shifts Cam Parts>
1. Remove the electric shift cam parts from the case assembly.
2. Separate the electric shift cam from the shift shaft.
3. Holding the shift shaft in a vise, remove the torsion spring
and spacer from the shift shaft using a screw driver.
<Case Assembly>
1. Remove the oil seal.
2. Remove the retaining ring and bearing.
3. Remove the pin from the transfer case.
Notice
Be careful not to damage the pin.
4. Using a press, remove the ring gear from the case.
TRANSFER CASE (PART TIME 4408) 5D1-21
100 Electric Shift Cam
101 Torsion Spring
102 Spacer
103 Shift Shaft
111 Case
105 Transfer Case Assembly
106 Oil Seal
107 Retaining Ring
108 Ball Bearing
119 Pin
110 Ring Gear
111 Case