Table of Contents
Advertisement
Removal & Installation Procedure
1. Remove the hood striker assembly.
Notice
When installing, tighten the bolt after setting the hole
between wratch and hood striker assembly.
Installation Notice
Tightening Toque
2. Remove the hood Mounting bolt and hood lifter assembly.
Installation Notice
Tightening Toque
3. Remove the hood lock, hood relese from the clip.
4. Remove the cable holder screw.
5. Pull the cable nut toward driver side.
6. Installation should follow the removal procedure in the
reverse order.
8 - 11 Nm
14 - 26 Nm
BODY FRONT END 9R-3
Advertisement
Chapters
Table of Contents
