Daewoo MUSSO Service Manual page 472

1B3-168 OM600 ENGINE MECHANICAL
12. Coat the bolts (12) with oil and then tighten the bolts.
Tightening Torque
13. Rotate the crankshaft and check axial clearance between
the connecting rod and crankshaft.
14. Measure clearance between the piston crown and cylinder
Standard
15. Position the piston at TDC and measure the distance
between the piston crown and the crankcase surface.
Standard
Notice
Measure at points marked.
40Nm + 90°
Max. 0.12mm
Max. 0.965 mm
Dial Gauge 001 589 00 53 21
Dial Gauge Holder 363 589 02 21 00