Table of Contents
Advertisement
Installation of Windshield
1. Cleaning of windshield mounting flange.
Do not reuse a gauze over 20 times.
Saturate the gauze in solvent (lsoprophyl alcohol).
Keep the cleaned surface to be cleaned.
Apply body primer to the cleaned and dry body flange.
If body flange is oiled or contaminated, primer can not
be applied.
Duration : 3 minutes - 8 hours (reapply after 8 hours).
If primer is applied to the body, clean off immediately
with solvent (ethyl alcohol and ethyl acetate, 50 : 50 in
volume).
Do not apply primers which is over its duration.
Be careful not to contaminate other parts.
2. Installation of windshield spacer.
Insert the spacer completely.
After inserting, there should be no clearance on the body.
- To the direction of the side spacer.
- To the direction of the lower spacer.
3. Cleaning of windshield glass.
Clean the windshield glass keeping 15mm from the edge
of glass.
Do not reuse a gauze over 20 times.
Saturate the gauze in solvent (lsoprophyl alcohol).
Do not touch the cleaned glass surface.
Apply glass primer to the cleaned and dry glass.
If glass is oiled or contaminated, primer can not be
applied.
GLASS AND MIRRORS 9L-5
Advertisement
Chapters
Table of Contents
