Daewoo MUSSO Service Manual page 859

2D-6 REAR SUSPENSION
Removal & Installation Procedure
Stabilizer bar
1. Remove the upper nut of the connecting link.
Installation Notice
Distance Between the Nut
end and the Screw end
Tightening Torque
2. Remove the stabilizer bar cap fixing bolts (arrow) and
remove the stabilizer bar.
Installation Notice
Tightening Torque
Lateral Rod
1. Remove the lateral rod fixing nut from the frame.
Notice
Completely press the coil springs.
Installation Notice
Tightening Torque
2. Remove the lateral rod fixing nut from the rear axle and
remove the lateral rod.
Installation Notice
Tightening Torque
10 - 13 mm
16 - 22 Nm
30 - 45 Nm
150 - 180 Nm
150 - 180 Nm