Call Waiting - Iwatsu Omega-Phone 924 Technical Manual

Chapter 6

Call Waiting

Feature 99
When enabled, the user will hear an alert tone when an internal call is waiting. Toggle
the feature on and off when it is programmed on a Programmable Key.
Associated Features
N/A
Conditions:
N/A
Camp On – CO Line
Feature93
Whenever a busy CO Line is accessed, either directly by pressing a key or through a
dial codes, such as 9, this feature allows the caller to queue a busy CO line and reserve
that line for use when it becomes available. This feature eliminates the need for you to
continually observe the line status for availability. You can only have one Call Back
active at any time.
Associated Features
N/A
Conditions:
1. During call back alert tones, lifting the handset will directly connect the extension
user to the selected CO Line calling back.
2. Every CO Line can have Call Back requests by all extensions at the same time.
3. Every extension can Call Back only one busy CO Line at the same time.
4. The Call Back Alerting Ring Time is 10 seconds. If the call back goes unanswered
during the 10 seconds ring time the call back is canceled.
5. CO Lines that have Call Back requests will recall the Call Back initiator. The Call
Back CO Line will become available to other extensions if the call back extension
doesn't answer within 10 seconds.
6. Call Back from an extension using a Pooled Group key for access of CO Lines
will set the call back to all the lines in the Pooled Group. When any one of the
lines in the Pooled Group becomes available the user must lift the handset or press
the reply soft key to be connected to the available line from the Pooled Group.
7. During the time that the Call Back is recalling the initiator, a new incoming call
will take precedence over Call Back and will be answered when the extension
goes off hook.
Associated Programming
N/A
Associated Programming
N/A
Telephone Operations
109