Iwatsu Omega-Phone 924 Technical Manual page 57

Chapter 5
Warning Time (Conversation Time Out Tone)
MBC - 3-12-1 Outgoing
MBC - 3-12-2 Incoming
These Parameters are directly associated with the Drop Call – Out/In and Warning
Tone parameters in Extension programming. A Warning Timer is provided for the two
call conditions:
•
•
These timers govern the how long an extension programmed for either of these
features may be connected on an Outgoing/Incoming CO call before hearing the
Warning Tone. An extension can also be disconnected in association with the Drop
Call function.
Outgoing
•
•
Incoming
•
•
• Press show to get to sub fields
• Press chg to select.
• Press next to advance or back to return to the previous subfield.
Recall Time (Hold Recall)
MBC - 3-13
The recall time is a system wide parameter that determines the amount of time that a
call will remain on hold before recalling at the station that placed it on hold.
•
•
Press chg to select.
Alternate Ring Time (Delay Ring)
MBC - 3-14
When an initially ringing CO Line is programmed to ring the alternate attendant, and
the inbound CO Line call goes unanswered, the call will automatically switch to
Active Alert Ring Status.
•
•
Press chg to select.
Outgoing call (1-ext-09)
Incoming call (1-ext-10)
Data Range: 01 - 10, 15, 20, 25, 30
Factory Setting: 05
Data Range: 01 - 10, 15, 20, 25, 30
Factory Setting: 05
Data Range: 10, 16, 30, 60, 90, 120 seconds
Factory Setting: 30 seconds
Data Range: 10, 20, 30, 40, 50, 60 seconds
Factory Setting: 30 seconds
Database Programming
53