Iwatsu Omega-Phone 924 Technical Manual page 47

Chapter 5
CFW Auxi Lamp (Call Forward Indication)
MBC - 1-EN-17
Telephone with an auxiliary lamp can be programmed to light when the extension is
"Call Forwarded" to another destination. When set to "N" no, the auxiliary lamp will
not illuminate when the extension is forwarded, otherwise, it will remain lit.
•
•
Press chg to select Y to allow or N to deny the CFW Auxi Lamp feature.
Default Settings (Station Default)
MBC - 1-EN-18
This will reset all of the programming parameters for the entered extension to the
default settings.
•
•
Press set to default the settings of the entered extension number.
Do Not Disturb (DND) Function Allow
MBC - 1-EN-19
An extension can be allowed or denied the ability to be placed into Do-Not-Disturb
mode. If denied, the extension cannot be place into DND mode.
•
•
Press chg to select Y to allow or N to deny the extension from using the Do-Not-
Disturb feature.
BEEP 2 Allow (Invalid Feature Code Error Tone)
MBC - 1-EN-20
A two-burst error tone is returned to the station user when attempting to access an
invalid or disabled feature code. This feature can be disabled, if desired.
•
•
Press chg to select Y to allow or N to deny the extension from using the Beep 2 Allow
feature.
Data Range: Y - N
Factory Setting: Y
Data Range: N/A
Factory Setting: N/A
Data Range: Y - N
Factory Setting: Y
Data Range: Y - N
Factory Setting: Y
Database Programming
43