Iwatsu Omega-Phone 924 Technical Manual page 56

Omega-Phone 924 Technical Manual
PBX Auto Pause (PBX Pause Time)
MBC - 3-09
When a PBX Line port is connected to a CO Line port, specific digit(s) (e.g. "9") are
required to access a PBX CO Line. The system will automatically insert a pause
between these digits when redial features are invoked. This timer determines how
long (duration) the pause will be.
• Data Range: 1 - 9 seconds
• Factory Setting: 2 Seconds
Press chg to select.
Tone Time (DTMF Tone Duration)
MBC - 3-10
The Tone time is the length of time that the system will transmit a DTMF tone when a
CO Line is accessed.
• Data Range: 70 - 120 milliseconds
• Factory Setting: 70 milliseconds
Press chg to select.
Voice Mail Dialing Ratio (Feature No Longer Used)
MBC - 3-11-1 Tone Time
MBC - 3-11-2 Int_Dgt Time
Two sub fields exist for the Voice Mail Dialing Ratio parameter:
• Tone Time: This timer is relevant only for analog interface voice processing
systems connected to the system analog ports. The Tone Time is the minimum
duration of DTMF tone delivered to the Voice Mail analog port for voice
processor - call processing.
• Int_Dgt Time (Interdigit Timer): This timer is relevant only for analog
interface voice processing systems connected to the system analog ports. The
Int_Dgt Time is the minimum duration of time between DTMF tones
delivered to the Voice Mail analog port for voice processor – call processing.
Tone Time
• Data Range: 60, 90, 120, 150 milliseconds
• Factory Setting: 90 milliseconds
Int_Dgt Time (Interdigit Timer)
• Data Range: 60, 90, 120, 150 milliseconds
• Factory Setting: 90 milliseconds
• Press show to get to sub fields
Press chg to select.
Press next to advance or back to return to the previous subfield.
52