Iwatsu Omega-Phone 924 Technical Manual page 115

Chapter 6
Day and Night Modes
Feature 63
The system can be programmed to follow a seven day, twenty-four hour time schedule
that will automatically switch the system from Day to Night modes. These modes will
affect the incoming call ringing assignment by sending them to their programmed day
or night destinations. In addition, the Attendant can change the system manually from
Day to Night mode. Doing so will leave the system in that mode until it is manually
changed. The Feature code (Feature 63) is used to toggle between these modes.
Associated Features
Attendant Administration (F#0)
Night Service Mode (F63)
Conditions:
1. At default, no CO Lines are programmed to ring an extension.
2. The system operation Mode must be set to Time Mode for the system to automat-
ically switch from Day to Night Mode ringing.
3. When programming Time Service Mode switching, the input time represents the
time of day that the service mode will change to the associated Service Mode.
Default Programmable Feature Keys
Feature 58
Use the default programmable key feature to bring the telephone's feature key back to
factory default. This will require the extension users password.
Associated Features
N/A
Associated Programming
Extension Ring Assignment 1-EN-06
Hunt Group Answer 2-LN-03
Resource - Time Switching 4-07
CO Line Class of Service 2-LN-01/02
Extension Class of Service 2-LN-01/02
Associated Programming
N/A
Telephone Operations
111