Basic Features; Making An Outgoing Call; Receiving An Incoming Call - Iwatsu enterprise cs Quick Reference Manual

HOLD/DND (Hold/Do Not Disturb) - This key is used
to put a call on Hold or to set the Do Not Disturb
function and prevent calls from ringing at your
extension.
Note: See Hold/Quick Forward on page 11.
Handset Volume Control - The handset volume
control key allows you to adjust the handset
volume to one of three levels. Pressing the key
will toggle between the three volume levels.
Speaker Volume Control - The speaker
volume control key allows you to adjust the
volume control
the speakerphone.
raises the volume to one of nine settings. Pressing
the [-] will decrease the volume.
Ringer Volume Control - Pressing the
ringer volume control key allows you to
adjust the ringer volume to one of four levels.
[Mute] Key - When talking using the handset,
press [Mute] to mute the handset transmitter. If
using the speakerphone, press [Mute] to mute
the station microphone. When using the
headset jack, the [Mute] key mutes the transmitter on
the headset.
ICM - The intercom system is the internal network
used to
extensions in your Iwatsu system. Pressing the [ICM]
key connects you to an intercom line for conversation
with other extensions.

BASIC FEATURES

Making an Outgoing Call

• Lift the receiver.
• Press an outside line key. You will hear a dial
tone.
• Dial telephone number.
Make a dialing mistake?
• Press the [FLASH] key to get new dial tone.
• Dial again.

Receiving an Incoming Call

When your phone rings and lamp flashes:
• Lift the receiver to connect the call.
If your phone does not connect you to the call
automatically
When your phone rings and lamp flashes:
• Lift the receiver.
• Press the key with the flashing lamp to
connect the call.
communicate
of the speaker when using
Pressing the [+] key
between
2
the telephone