Iwatsu Omega-Phone 924 Technical Manual page 75

Chapter 5
KSU Revision
MBC - 4-22
This function is made available for diagnostics only. When accessed the software
version in use in the main system memory is displayed.
•
•
Press show to select.
Feature Key Copy
MBC - 4-23
Use Feature Key Copy to copy the Programmed Feature Keys from one Extension to
another Extension. Begin by creating a Template Extension, one that has the
attributes to be shared, and then do a Copy From and a Copy To for each Extension
that should have these attributes.
•
•
Press show to select.
Input the Extension number that is currently programmed with Feature Key data as
desired for others that will be copied with the data.
• Press save.
• Input the Extension number to which this Feature Key data will be copied.
• Press save.
• Repeat as necessary for all Extensions to be copied.
UART Type (SMDR / Programming)
MBC - 4-24
This parameter is used to set the signaling protocol for the RS232 port on the Option
Board. Select between SMDR or RMP. When using RMP, SMDR will be disabled,
likewise when SMDR is enabled, RMP will be disabled.
•
•
Press chg to select.
Data Range: N/A.
Factory Setting: N/A.
Data Range: Copy From / Copy To.
Factory Setting: N/A.
Data Range: SMDR/RMP.
Factory Setting: SMDR.
Database Programming
71