Iwatsu Omega-Phone 924 Technical Manual page 112

Omega-Phone 924 Technical Manual
Caller ID (Standard on all CO Lines)
The Caller ID feature requires Incoming Caller Identification as facilitated by the
local telephone company. This telephone company feature requires a subscription to
the telephone company service to operate.
The system is equipped standard to receive Type 1 Caller ID data from the telephone
company on all CO Line interfaces. This data when received by the telephone
company will be displayed on all ringing digital display telephones.
Associated Features
Call Log
SMDR
Conditions:
1. CID data will only be displayed when it is received from the telephone company
as part of the service subscription.
2. Using the navigation keys, select "Call Log". Press the Up key, for outgoing, and
the down key for incoming call logs.
Caller Identification - Call Log
Each extension is equipped with a Call Log that stores both inbound (received) and
outbound (dialed) calls. Using the navigation keys, select Call Log. Press the up key
to view outgoing and the down key to view incoming calls placed to/from the
extension. The Call Log is stored in reverse order, from newest to oldest. If the name
is not supplied, only the number will be listed, if the name is supplied, the name will
be displayed. Press the Activation key to initiate a call back to the displayed
telephone number.
Associated Features
Conditions:
1. All digital display telephones have a Caller ID Table
2. If no name is delivered from the telephone company, the number only will be dis-
played.
3. Proper programming of local area code(s) and the long distance prefix are
required to assure accurate redial of CID numbers from the call log Table.
108
Associated Programming
Associated Programming
Call Handling
Country Code 3-27
Long Distance Prefix 3-28
Local Area Code 3-29
Resource
CID RPT MOD 4-25