Iwatsu Omega-Phone 924 Technical Manual page 43

Chapter 5
Monitor COS
MBC - 1-EN-03
Defines if a station can monitor other extensions and which stations can monitored.
Monitoring is based on a Privilege Level where:
•
•
To monitor another extension the privilege level must be set at a higher level (lower
number). Example: An extension with a Monitor Class of "0 - Highest Privilege" can
monitor all extensions on the system with a Monitor Class of 1 -9. An extension with a
Monitor Class of "9 - Lowest Privilege" cannot monitor any other extension. Stations
with the same Monitor Class cannot monitor each other.
•
•
Note:
Press chg to select to scroll through the night classes of service 0 - 7.
Line Assignment (Outgoing Restriction)
MBC - 1-EN-04
CO Line (CO Lines) are assigned to each extension for access when making outbound
calls. CO Lines not assigned to an extension cannot be accessed by that extension.
•
•
Press Show to enter programming area. Press chg to select "Y" to allow or "N" to
deny the entered extension from accessing the entered CO Line when making an
outside call. Press next to select the next CO Line.
Receive Assignment (Incoming Restriction)
MBC - 1-EN-05
CO Lines are assigned to each extension for access when receiving inbound calls. CO
Lines not assigned to an extension cannot be accessed by that extension.
•
•
Press show to enter programming area. Press chg to select "Y" to allow or "N" to deny
the entered extension from accessing the selected CO Line when receiving an outside
call. Press next to select the next CO line.
0 = Highest Privilege
9 = Lowest Privilege
Data Range: 0 - 9
Factory Setting: 5
The manufacturer assumes no liability for inappropriate or possibly illegal use
of this feature. It is the users responsibility to use this feature in accordance
with local laws and regulations.
Data Range: Y - N (By CO Line)
Factory Setting: Y
Data Range: Y - N (By CO Line)
Factory Setting: Y
Database Programming
39