Iwatsu Omega-Phone 924 Technical Manual page 136

Omega-Phone 924 Technical Manual
5. The LNR feature code may be programmed on a programmable feature key.
6. LNR will repeat a hook-flash in the same sequence as it was first dialed. If a speed
dial number was first dialed LNR will dial the speed dial number and any subse-
quent manually dialed digits.
7. If the Last Number Redial memory is empty, the telephone will receive error tone
and the telephone will display LNR EMPTY.
Least Cost Routing
Feature 68
This allows the system to determine which Line Group, and whether to insert or delete
specific digits. Extension can be forced to use LCR when making Central Office
Telephone calls. In addition, extensions can select to use LCR or they can be forced to
use LCR.
Related Features
Conditions
1. This must be enabled in Database Programming
Loud Bell
The Option Module provides one loud bell dry contact which is rated at 24vdc, 1
Amp. Loud Bell Control: If the system is installed in high noise environments, there is
often a requirement to equip a loud high-gain ringing device or flashing strobe light.
Using the contact in this way provides for control of an optional, ancillary loud
ringing device. The device is connected to the contact as a trigger. When ringing
occurs on CO Lines in CO Line Groups designated as Loud Bell CO Line Groups, the
contact closure operates and controls the connected device.
Related Feature
Extension
Ringing
Conditions
1. The Loud Bell or Strobe light will be activated each time the associated CO Line
rings.
132
Programming
Extension - Forced 1-EN-23
LCR Time 3-31
Restriction LCR Enabled 5-2-2
Programming
CO Line 2-LN-06
Control - Dry Contact 6-4