Omega-Phone 924 Technical Manual
Gain (RX)
MBC - 2-LN-11
The system is DSP processor based and has the ability to adjust audio levels for all
CO Line connections. Use Gain (Rx) to adjust the receive audio level of internal
extensions on CO Lines.
•
Data Range: -00 dB to -12 dB
•
Factory Setting: -03 dB
Press chg to select.
Gain (TX)
MBC - 2-LN-12
The system is DSP processor based and has the ability to adjust audio levels for all
CO Line connections. Use Gain (Rx) to adjust the transmit audio level of internal
extensions on CO Lines.
•
Data Range: -00 dB to -12 dB
•
Factory Setting: -03 dB
Press chg to select.
DTMF Disable (Not Used)
MBC - 2-LN-13
Not used at this time — Do not change from Default Setting (00)
CID Mode
MBC - 2-LN-14
Caller ID signals from the CO can be received in two transfer methods; DTMF or
FSK. The system can detect both but must be set for the method used by the CO to
which it is connected.
•
Data Range: FSK - DTMF
•
Factory Setting: FSK
Press chg to select.
Pre-CFW (DIL Line)
2-LN-15
Predefined Call Forward (CO Lines) is used to set a "fixed" forward destination for a
CO Line so that calls are routed to that destination. This feature is normally set when
using voice mail to forward CO Lines to the voice mail system for Automated
Attendant use.
•
Data Range: 10 - 37, 82 - 89
•
Factory Setting: NULL
•
To Set to Internal Voice Mail: 87
Press chg and enter the extension or hunt group number. Press save.
48