Power Supply When Connected Directly To A Computer; Power Supply (Poe Ieee 802.3Af) Using Power-Over-Ethernet Products - Mobotix D24M Manual

96
/133
The IP addresses in
the diagram are shown
only as an example
For the D24M, you
should use the new
blue MX-NPA-PoE-Set
- previous MOBOTIX
network power acces-
sories such as the NPA
Set, Power Box and
Power Rack (MX-NPA-
Set, MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with the D24M
The IP addresses in
the diagram are shown
only as an example
D24 Camera-Manual: InSTALLATIOn

2.13.4 Power Supply When Connected Directly To A Computer

1. Connect the factory pre-installed cable of the camera to the Camera connector of
the Network Power Adapter.
2. Connect the PC/Power connector of the Network Power Adapter to the Ethernet PC/Power PC/Power connector of the Network Power Adapter to the Ethernet
port of the computer.
3. Plug the RJ45 connector of the external power unit into the LAn/Power connector
of the Network Power Adapter.

2.13.5 Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products

Connect the factory pre-installed cable of the camera to the Ethernet connector of the PoE
switch/router. The switch/router must support the PoE standard IEEE 802.3af.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Power Power connector