Mobotix D24M Manual page 112

112
/146
D24 User Manual: OPERATInG THE CAMERA
have an unknown password or for which no user name/password combination has been
specified in MxEasy will be displayed in a different color.
If all the desired MOBOTIX cameras are highlighted as Accessible in the video source list,
you can proceed to the Selecting Cameras section below. Cameras with the status Invalid
network can be reconfigured for the "proper" subnet, as described in the following section.
Configuring MOBOTIX Cameras For A Different network
Camera on a different
subnet
Using Bonjour, MxEasy finds not only cameras on the same network as your computer,
but also MOBOTIX cameras located in other subnets (Status Invalid network). In such a
case, you would not be able to establish any connection to cameras in a different network
or subnet (without going into much further detail about the specific details TCP/IP network
configurations). This is possible, for example, when a camera with a factory IP address is
connected to a network in which a DHCP server automatically assigns the IP addresses.
MxEasy can automatically configure such a camera so that it is "integrated" into your
existing network. To do so, simply highlight the desired camera in the list.
Clicking Next displays a security
prompt; if you click OK, the dialog for
reconfiguring the selected camera
will appear.
If your computer automatically obtains
its IP address from a DHCP server,
then this is certainly the best choice
for that specific camera and most likely for all other cameras that have been found in a
different subnet (Get IP address automatically option).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com