Advertisement

Quick Links

Quick Installation
MOBOTIX D71
© 2022 MOBOTIX AG
V1.20_9/8/2022, Order Code: Mx-D71A-8DNxxx/Mx-D71A-4DNxxx

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D71 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mobotix D71

  • Page 1 Quick Installation MOBOTIX D71 © 2022 MOBOTIX AG V1.20_9/8/2022, Order Code: Mx-D71A-8DNxxx/Mx-D71A-4DNxxx...
  • Page 2: Table Of Contents

    Legal Notes Notes on System Security Drilling Template Drilling Template D71 Delivered Parts and Dimensions MOBOTIX D71: Scope of Delivery Mounting Supplies: Scope of Delivery Wall Mount: Scope of Delivery In-Ceiling Set: Scope of Delivery MOBOTIX D71 – Dimensions Technical Specifications...
  • Page 3 Table of Contents Mounting on a Pole (Corner/Pole Mount) Connecting the Camera Connecting an USB-C Device Connecting I/O Devices Connecting the Camera to the Network Operating the Camera Getting Started Network Settings Camera Software in the Browser Access the camera's website in the browser Basic Settings Maintenance Replacing the microSD card...
  • Page 5: Before You Start

    Before You Start This section contains the following information: Support Safety Notes Legal Notes 5 / 72...
  • Page 6: Support

    Support Support If you need technical support, please contact your MOBOTIX dealer. If your dealer cannot help you, he will contact the support channel to get an answer for you as quickly as possible. If you have internet access, you can open the MOBOTIX help desk to find additional information and software updates.
  • Page 7: Legal Notes

    Electrical and electronic products contain many valuable materials. For this reason, we recommend that you dispose of MOBOTIX products at the end of their service life in accordance with all legal requirements and reg- ulations (or deposit these products at a municipal collection center). MOBOTIX products must not be dis- posed of in household waste! If the product contains a battery, please dispose of the battery separately (the corresponding product manuals contain specific directions if the product contains a battery).
  • Page 8 Before You Start Legal Notes FCC Disclaimer This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference when the equipment is operated in a commercial environment.
  • Page 9: Notes On System Security

    Notification threshold: 10   Timeout: 60 minutes   Block IP Address: √ For more information on this new feature, please read the «Cyber Protection Guide» on www.mobotix.com (under Support > Download Center > Documentation > Brochures & Guides > Cyber Security). 9 / 72...
  • Page 11: Drilling Template

    Open this file in a PDF viewer (Acrobat Reader, Foxit Reader, or similar) and print the file without scaling (original size). NOTE! Download the drilling template from the MOBOTIX website: www.mobotix.com > Support > Download Center > Marketing & Documentation > Drilling Templates.
  • Page 12 Mx-D71 Bohrschablone / Drilling Template / Gabarit de perçage Kamera / Camera / Caméra Maßstab 1:1 / Scale 1:1 / Echelle 1:1 DE/EN/FR_01/2022 100 mm/3.94 in ø 5.5 mm/0.22 in Nur in Originalgröße kopie- ren oder ausdrucken! Ausschnitt für Kabel und Anschlüsse...
  • Page 13 Mx-D71 Bohrschablone / Drilling Template / Gabarit de perçage Aufputz-Set / On-Wall Set / Kit de montage visible Maßstab 1:1 / Scale 1:1 / Echelle 1:1 DE/EN/FR_01/2022 80 mm/3.15 in ø 5 mm/0.20 in 30 mm/1.18 in 168 mm/6.61 in Nur in Originalgröße kopie-...
  • Page 14 Mx-D71 Bohrschablone / Drilling Template / Gabarit de perçage Eck- und Masthalter / Corner and Pole Mount / Support poteau/mural Maßstab 1:1 / Scale 1:1 / Echelle 1:1 DE/EN/FR_01/2022 90 mm/3.54 in 7 mm/0.28 in...
  • Page 15 Mx-D71 Bohrschablone / Drilling Template / Gabarit de perçage Outdoor-Wandhalter / Outdoor Wall Mount / Support mural d’extérieur Maßstab 1:1 / Scale 1:1 / Echelle 1:1 71.5 mm/2.81 in DE/EN/FR_01/2022 50 mm/1.97 in 86 mm/3.39 in 7.5 mm/0.30 in...
  • Page 16 MOBOTIX AG • Kaiserstrasse • D-67722 Langmeil • Tel.: +49 6302 9816-0 • sales@mobotix.com • www.mobotix.com MOBOTIX ist ein eingetragenes Warenzeichen der MOBOTIX AG in MOBOTIX is a trademark of MOBOTIX AG registered in the European MOBOTIX est une marque déposée de MOBOTIX AG en Union der Europäischen Union, den USA und in anderen Ländern. Ände- Union, the U.S.A., and in other countries.
  • Page 17: Delivered Parts And Dimensions

    Delivered Parts and Dimensions This section contains the following information: MOBOTIX D71: Scope of Delivery Mounting Supplies: Scope of Delivery Wall Mount: Scope of Delivery In-Ceiling Set: Scope of Delivery MOBOTIX D71 – Dimensions 17 / 72...
  • Page 18: Mobotix D71: Scope Of Delivery

    Delivered Parts and Dimensions MOBOTIX D71: Scope of Delivery MOBOTIX D71: Scope of Delivery Fig. 1: Scope of delivery MOBOTIX D71 Body Scope of delivery MOBOTIX D71 Body Item Count Description I/O dome, white (installed) USB plug, blue (installed) Bayonet catch for USB port, blue...
  • Page 19: Mounting Supplies: Scope Of Delivery

    Description 1.13 Sticker with IP address of camera 1.14 Anti-glare ring Mounting Supplies: Scope of Delivery Fig. 2: Scope of Delivery MOBOTIX D71 Mounting Supplies Scope of Delivery D71 Mounting Supplies Item Count Description D71 lens wrench, orange Torx wrench 3.5 mm Allen wrench 2.5 mm...
  • Page 20: Wall Mount: Scope Of Delivery

    Delivered Parts and Dimensions Wall Mount: Scope of Delivery Wall Mount: Scope of Delivery Fig. 3: Scope of Delivery Wall Mount Scope of Delivery Wall Mount Item Count Description Wall Mount upper shell, white Bottom plate, white Allen wrench 3 mm Stainless steel Allen screws 4x18 mm Stainless steel Allen screws 4x40 mm Stainless steel washers Ø4.3 mm...
  • Page 21: In-Ceiling Set: Scope Of Delivery

    Stainless steel Allen screws M6x30 mm Stainless steel washers M6 Stainless steel hexagon nut M6 MOBOTIX D71 – Dimensions NOTE! Download the drilling template from the MOBOTIX website: www.mobotix.com > Support > Down- load Center > Marketing & Documentation > Drilling Templates. CAUTION! Always print or copy the drilling template at 100% of the original size!
  • Page 22 Delivered Parts and Dimensions MOBOTIX D71 – Dimensions Fig. 5: MOBOTIX D71: All measurements in mm 22 / 72...
  • Page 23: Technical Specifications

    Technical Specifications This section contains the following information: Order Information Hardware Image Formats, Frame Rates, Image Storage General Features Video Analysis Video Management Software MOBOTIX D71 Model Variants 23 / 72...
  • Page 24: Order Information

    Technical Specifications Order Information Order Information Name MOBOTIX D71 Order Code: Mx-D71A-8DNxxx/Mx-D71A-4DNxxx Hardware Image sensor (DN) 4K 3840x2160/4MP 2688x1512   Light sensitivity Color sensor (day): 0,1 lx @ 1/60 s; 0,005 lx @ 1 s   BW sensor (night): 0,02 lx @ 1/60 s; 0,001 lx @ 1 s...
  • Page 25 Technical Specifications Hardware I/Os INPUT   Contact Closure (no galvanic isolation necessary) or up to 50V AC/DC   max. length for cables: 50m OUTPUT   requires pull-up resistor and external power supply (10mA / max. 50V DC - no AC)   max.
  • Page 26: Image Formats, Frame Rates, Image Storage

    Weight Gross weight: 1.180g Housing Aluminum, PBT-30GF Standard accessories MOBOTIX D71: Scope of Delivery Detailed technical doc- www.mobotix.com > Support > Download Center > Marketing & Docu- umentation mentation MTBF 80,000 hours Certificates EN 50121-4:2015, EN 50581:2012, EN 55032:2012+AC:2013, EN 55035:2017, FprEN 61000-6-1:2015, EN 61000-6-2:2015, EN 61000-6-3:2007+A1:2011+AC:2012, EN 61000-6-4:2007+A1:2011, EN 62368-1:2014 + AC: 2015 + A11: 2017 + AC: 2017,...
  • Page 27: General Features

      Privacy zone scheduling   Remote alarm notification (network message)   Programming interface (HTTP-API)   MOBOTIX MessageSystem ONVIF compatibility Profile G, S, T Master/Slave functionality Remote alarm notification email, network message (HTTP/HTTPS), SNMP, MxMessageSystem DVR/storage management Within the camera via microSD card, on external USB and NAS devices, dif-...
  • Page 28: Video Management Software

    Heatmap, people counting & object-based counting MOBOTIX App support Video Management Software Feature Properties MOBOTIX HUB www.mobotix.com > Support > Download Center > Software Downloads MxManagementCenter Yes (MxMC 2.2 and higher) www.mobotix.com > Support > Download Center > Software Downloads MOBOTIX LIVE App Available in Android and iOS App Stores.
  • Page 29 Technical Specifications MOBOTIX D71 Model Variants For a complete list of lenses for MOBOTIX cameras, please see the Lens Table document for MOBOTIX 7 mod- els on www.mobotix.com > Support > Download Center > Marketing & Documentation > Lens Table. 29 / 72...
  • Page 31: Mounting

    Mounting This section contains the following information: Before Mounting the Camera Protective Measures Attaching the Anti Glare Ring Adjusting the Camera Lens Removing the Dome Adjusting the Camera Lens Attaching the dome Mounting Options Mounting the Camera Without Accessories Mounting with the On-Wall Set Mounting with the In-Ceiling Set Mounting with the Wall Mount Mounting on a Corner (Corner/Pole Mount)
  • Page 32 Mounting Connecting I/O Devices Connecting the Camera to the Network 32 / 72...
  • Page 33: Before Mounting The Camera

    (see Camera Software in the Browser, p. 65). The MOBOTIX D71 has been designed for wall mounting. Using optional accessories, you can also install the camera as follows:   For mounting on walls looking downwards, use the Wall Mount; see Mounting with the Wall Mount, p.
  • Page 34: Protective Measures

    WARNING! When laying cables indoors and outdoors, the current regulations for cable laying, lightning and fire protection must always be observed. MOBOTIX cameras are protected against the effects of minor over voltages by a number of measures. However, these measures cannot prevent larger surge voltages from causing damage to the camera. When installing the cameras outdoors, special attention should therefore be paid to lightning protection and the associated dangers for the building and network infrastructure.
  • Page 35: Attaching The Anti Glare Ring

    Mounting Adjusting the Camera Lens NOTE! Electrical surge protection available using the MX-Overvoltage-Protection-Box, which is available as an accessory. Further information on how to avoid damage caused by lightning and over voltage is available from man- ufacturers of lightning and over voltage protection devices. Attaching the Anti Glare Ring The anti-glare ring is used to protect the lens from glare effects that can have a negative effect on the camera image.
  • Page 36: Removing The Dome

    Mounting Adjusting the Camera Lens Removing the Dome ①  1. Remove the cover of the clamping ring by turning counterclockwise until resistance is felt.  2. Loosen the four fastening screws from the clamping ring with the supplied allen wrench Mounting Sup- plies: Scope of Delivery, p.
  • Page 37: Adjusting The Camera Lens

    Mounting Adjusting the Camera Lens Adjusting the Camera Lens ①  1. Release the two Allen screws on both sides of the lens mount with the supplied Allen wrench Mount- ing Supplies: Scope of Delivery, p.  2. Aim the camera by rotating ②...
  • Page 38: Attaching The Dome

    CAUTION! Never use force when adjusting the direction of the camera, as this could damage the cam- era beyond repair. Mounting Options You can mount the MOBOTIX D71 to any even surface e.g. on a wall or ceilings without any accessories. 38 / 72...
  • Page 39: Mounting The Camera Without Accessories

    Mounting the Camera Without Accessories The MOBOTIX D71 can be easily installed directly on walls or ceilings. For installation without any accessories, you should first install a flush-mounted wall outlet, since the connectors on the rear of the camera need some space.
  • Page 40 Mounting Mounting Options Step by Step Fig. 7: Drilling template with holes for positioning the fastener screws (red circles) and for the flush-mounted wall outlet (green circle)  1. Mark the holes ① for drilling using the drilling template (see Drilling Template as PDF).
  • Page 41: Mounting With The On-Wall Set

    RJ45 wall outlets and has ample space for additional modules (WiFi, batteries, etc.). The 10° On-Wall Set is the right choice if you want to mount the MOBOTIX D71 on a wall with the lens pointing vertically downward (90° or more).
  • Page 42 Mounting Mounting Options Step by Step  1. Mark the holes ① for drilling using the drilling template (see Drilling Template, p. 11). When drilling, use a suitable 8 mm drill bit and drill holes with at least 60 mm/1.2" depth.  2. Fully push the dowels W.8, p.
  • Page 43 Mounting Mounting Options  5. Mount the On-Wall Set (without the camera) at the intended position using the Torx screws from the ④ accessories  6. Attach the counter nut ⑤ to the network cable, pass it through the seal from the outside and tighten the nut.
  • Page 44: Mounting With The In-Ceiling Set

    With the In-Ceiling Set, you can discreetly install the MOBOTIX D71 Camera in the ceiling with the connections and most components hidden inside the ceiling. The In-Ceiling Set is particularly suitable if the D71 is to be installed in suspended ceilings of indoor spaces with customer or public traffic (e.g. hotels, restaurants, banks, retail stores, public buildings, etc.).
  • Page 45 Mounting Mounting Options Step by Step  1. Cut a round hole with a diameter of 200 mm into the ceiling (see Drilling Template, p. 11).  2. Run the network cable above the suspended ceiling and ensure that enough cable slack is available ①...
  • Page 46: Mounting With The Wall Mount

    The camera remains IP65 weatherproof (dust-proof and resistant to water jets). The Wall Mount also covers RJ45 wall outlets and has ample space for additional modules (WiFi, batteries, etc.). Before mounting the MOBOTIX D71 with the Wall Mount, drill the holes for the fixtures. You can use the sup- plied drilling template (see Drilling Template as PDF.
  • Page 47 Mounting Mounting Options Step by Step  1. Mark the holes ① for drilling using the drilling template (see Drilling Template, p. 11). When drilling, use a suitable 8 mm drill bit and drill holes with at least 60 mm/1.2" depth. Fig. 8: Wall Mount with holes for positioning the fastener screws  2.
  • Page 48: Mounting On A Corner (Corner/Pole Mount)

    Mounting Mounting Options  8. Using the supplied Allen wrench W.2, p. 20, secure the camera to the bottom plate of the Wall Mount with two long Allen screws W.5, p. 20 and one washer W.6, p. 20 each.  9. Connect the camera to the PoE network connection of the building (see Connecting the Camera to the Network, p.
  • Page 49 Mounting Mounting Options Dimensions MOBOTIX D71 Corner/Pole Mount Fig. 10: Dimensions MOBOTIX D71 Corner/Pole Mount – front view NOTE! When installing, the arrows of the mount must point upwards. Fig. 11: Dimensions MOBOTIX D71 Corner/Pole Mount– side view Step by Step ①...
  • Page 50 Mounting Mounting Options  2. Drill the holes with a 10 mm wall drill then place the included dowels in the drilled holes.  3. Push the supplied network cable through one of the holes ① Fig. 12: Prepare the network cabling  4. Screw the Corner/Pole Mount into place on the corner of the building using the wood screws and wash- ers.
  • Page 51: Mounting On A Pole (Corner/Pole Mount)

    NOTE! The pole should have a diameter between 60 and 180 mm. For dimensions of the Corner/Pole Mount, please refer to Dimensions MOBOTIX D71 Corner/Pole Mount, p. Step by Step  1. Guide the supplied stainless steel straps along the cutouts in the Corner/Pole Mount as shown in the fig- ure.
  • Page 52: Connecting The Camera

    Mounting Connecting the Camera Connecting the Camera All connections to the camera (network, MiniUSB, inputs/outputs) can be made directly on the camera. No fur- ther accessories are required for this. A PoE switch provides the camera's power supply. Connecting an USB-C Device The camera has a USB-C port that allows external storage media to be connected, for example.
  • Page 53 Mounting Connecting the Camera CAUTION! Before you proceed pay attention to the intended use or polarity of the slots (see Assignment of I/O Sockets, p. 54).  1. To uncover the I/O connectors, remove the white dome cap ① by rotating it counter-clockwise.  2.
  • Page 54  4. Attach the white dome cap by rotating it clockwise. Assignment of I/O Sockets The MOBOTIX D71 has an I/O connection terminal allows multiple I/O devices to be connected. The slots are assigned as follows: Digital IN + Line OUT - ①...
  • Page 55: Connecting The Camera To The Network

    Mounting Connecting the Camera Connecting the Camera to the Network CAUTION!   The PoE switch must provide Class 4 according to PoE Plus (802.3at-2009) as well as the 100/1000 Mbps Ethernet interface of the camera.   It is highly recommended to use an uninterruptible power supply (UPS) for the switch.  ...
  • Page 56 Mounting Connecting the Camera ②  2. Plug the supplied patch cable into the network connector and press the plug in firmly until the blue sealing ring clicks into place.  3. Attach the bayonet catch ③ by rotating it clockwise.  4. Connect the supplied patch cable 1.6, p.
  • Page 57: Operating The Camera

    Operating the Camera This section contains the following information: Getting Started Network Settings 57 / 72...
  • Page 58: Getting Started

    MxManagementCenter. Network Settings Once the camera has been connected to the network, you need to set up the MOBOTIX camera's network interface accordingly. This step involves setting up and checking the network parameters of the camera. If your network has an active DHCP server or if it is already running on a 10.x.x.x network with a 255.0.0.0 net- work mask) you do not need to change the camera's network parameters.
  • Page 59 Operating the Camera Network Settings camera. If neither your network nor your computer use an IP address in the 10.x.x.x network (e.g. a 192.168.x.x or 172.x.x.x network), you should follow one of the following methods for changing the camera's network parameters:  ...
  • Page 60 Operating the Camera Network Settings  3. Open the properties of Internet Protocol Version 4 (TCP/IPv4). Fig. 19: Properties of Internet Protocol V4  4. Activate Use the following IP-address. Enter an IP address in the 10.x.x.x range in this field (e.g. 10.16.0.11).
  • Page 61 MOBOTIX Camera in the Browser Fig. 21: Network settings in the web interface of the camera  1. Use a web browser to access the web interface of the MOBOTIX camera and enter the factory IP address (e.g. 10.16.0.99).  2. Click on the Admin Menu button in the user interface of the camera. The Quick Installation automatically starts after entering the access credentials of the admin user.
  • Page 62 NOTE! Using the Bonjour service (en.wikipedia.org/wiki/Bonjour_(software)), the application finds not only MOBOTIX cameras on the same subnet, but also in other subnets. Normally, you would not be able to estab- lish any connection to cameras in a different network or subnet.
  • Page 63 NOTE! The IP addresses of the other cameras are automatically incremented by 1.  4. Click on Apply to apply the settings. NOTE! For more information on this feature, please read the MxManagementCenter online help or the Tutorial (see www.mobotix.com > Support > Download Center > Documentation > Brochures & Guides > Tutorials). 63 / 72...
  • Page 65: Camera Software In The Browser

    Camera Software in the Browser The integrated software of the MOBOTIX D71 features a multitude of functions, such as video motion detection, long-term recording, alarm messaging and video IP telephony. Especially remarkable are the AI-based analytics features and the possibility to install third- party apps on the camera.
  • Page 66: Access The Camera's Website In The Browser

    Access the camera's website in the browser Access the camera's website in the browser Once the power and network connection of the MOBOTIX have been established, you can open the interface of the camera software in a web browser. Fig. 25: The interface of the camera software  1.
  • Page 67 Camera Software in the Browser Basic Settings   Admin Menu: This menu contains the basic configuration dialogs of the camera (e.g. passwords, inter- faces, software update).   Setup Menu: This menu contains the dialogs for configuring the image, event and recording para- meters.
  • Page 69: Maintenance

    Maintenance This section contains the following information: Replacing the microSD card Cleaning the Camera 69 / 72...
  • Page 70: Replacing The Microsd Card

    Maintenance Replacing the microSD card Replacing the microSD card CAUTION! To remove, insert or exchange the microSD card, the camera must be disassembled. Before removing the microSD card, deactivate the recording function and restart the camera. Non-observ- ance can lead to data loss! The microSD card must not be write-protected! Do not touch the circuit board when exchanging the microSD card! Step by step...
  • Page 71: Cleaning The Camera

    Maintenance Cleaning the Camera  4. Remove the microSD card  5. Insert microSD card: Insert the new microSD card in the holder and close the metal cover with light pres- sure until it snaps in.  6. Close the screw cap: Reinsert the screw cap and turn it carefully to the right using a wide screwdriver.  7.
  • Page 72 MOBOTIX AG • Kaiserstrasse • D-67722 Langmeil • Tel.: +49 6302 9816-103 • sales@mobotix.com • www.mobotix.com MOBOTIX is a trademark of MOBOTIX AG registered in the European Union, the U.S.A., and in other countries. Subject to change without notice. MOBOTIX do not assume any liability for technical or editorial errors or omissions contained herein. All rights reserved. © MOBOTIX...

Table of Contents