Mounting The Camera With The In-Ceiling Set; Mounting Instructions - Mobotix D24M Manual

66
/133
The white decorative
ring is also available
in stainless steel
D24 Camera-Manual: InSTALLATIOn
2.7

Mounting The Camera With The In-Ceiling Set

2.7.1 Mounting Instructions

The In-Ceiling Set offers the most stylish installation option for the D24M. When properly The In-Ceiling Set offers the most stylish installation option for the D24M. When properly
installed, the only visible component is a particularly sleek and discreet dome camera, installed, the only visible component is a particularly sleek and discreet dome camera,
while most of the remaining components are concealed inside the ceiling. Only the compact while most of the remaining components are concealed inside the ceiling. Only the compact
dome and the thin decorative ring that conceals the screws can be seen. dome and the thin decorative ring that conceals the screws can be seen.
For these reasons, the D24M installed with the In-Ceiling Set is the preferred option for For these reasons, the D24M installed with the In-Ceiling Set is the preferred option for
most indoor spaces frequented by customers or the general public (e.g. hotels, restaurants, most indoor spaces frequented by customers or the general public (e.g. hotels, restaurants,
banks, retail stores, public buildings, etc.). banks, retail stores, public buildings, etc.).
The common use of suspended ceilings in commercial and public buildings is an additional
reason to place a preference on in-ceiling installation. The installation process is also
simplified, as the network cable may be laid without difficulty and only a 15 cm diameter
hole must be cut in the ceiling or ceiling component.
Before installing the MOBOTIX D24M (IT/Secure) on an indoor ceiling with the In-Ceiling
Set, you must prepare the network connection and drill a hole for the camera:
• network connection: The network cable is fed through the ceiling directly above
the camera. When preparing the installation, make sure that about 15 cm of cable
remains unused.
• Cut a hole for installation: The hole should have a diameter of 150 mm (see drilling
template at the end of the manual).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com