Power Supply When Connected Directly To A Computer - Mobotix D16 DualDome Manual

Network and Power Connection

2.7.4 Power Supply When Connected Directly to a Computer

1. Connect the factory pre-installed cable of the camera to the camera connector of
the PoE adapter.
2. Connect the PC/Power connector of the PoE adapter to the Ethernet port of the
computer.
3. Plug the RJ45 connector of the power supply unit into the LAN/Power connector
of the PoE Adapter.
Power supply
PoE adapter
(MX-NPA-PoE)
Camera
RJ45
Camera (10.8.0.99)
PC (10.8.0.11/255.0.0.0)
The IP addresses in
the diagram are shown
only as an example
For the D16 you should use
the blue MX-NPA-PoE-Set or
the MX-NPA-Box – previous
MOBOTIXnetwork power
accessories, such as the
NPA-Set, Power-Box and
Power-Rack (MX-NPA-Set,
MX-NPR-4 and MX-NPR8/20)
are not suitable for
use with the D16.
59