Browser; Cleaning The Camera And Lens; Safety Warnings - Mobotix D24M Manual

136
/146
D24 User Manual: OPERATInG THE CAMERA

3.8.8 Browser

Current Internet browsers (Internet Explorer, Netscape, Mozilla Firefox, Safari, Konqueror,
Opera, ...) with enabled JavaScript can display the camera's live images with their stan-
dard settings. Text-based browsers (e.g. lynx) cannot display the user interface and are
not suitable for operating the camera.
Section 4.1.3 Browser Settings in the Camera Software Manual contains more detailed
information on possible browser problems.

3.8.9 Cleaning The Camera And Lens

If the lens becomes dirty during the installation process, clean the lens using a lint-free
cotton cloth. Make sure that the lens is still in focus after cleaning and adjust its focus if
required.
Cleaning The Dome:
• In order to protect the dome from being scratched and from getting dirty, only handle
the dome using a soft cotton cloth or the protective plastic of the camera's shipping box.
• You should clean the dome at regular intervals. Always use a soft, lint-free cotton
cloth for this purpose.
• If the dirt is more persistent, add a mild alcohol-free detergent without abrasive particles.
• Make sure you instruct cleaning personnel on how to clean the camera.

3.8.10 Safety Warnings

Electrical surges can be induced by other electrical appliances, improper wiring, but also
from the outside (e.g. lightning strikes to phone or power lines).
MOBOTIX cameras are protected against the effects of small electrical surges by a range
of measures. These measures, however, cannot prevent the camera from being damaged
when stronger electrical surges occur. Particular care should be taken when installing the
camera outside to ensure proper protection against lightning, as this also protects the
building and the entire network infrastructure.
MOBOTIX recommends having MOBOTIX cameras installed only by specialists accustomed
to installing network devices and who have proper respect for the pertinent regulations
lightning protection and fire prevention, as well as the current technology for preventing
damages from electrical surges.
Due to the high computing power of the D24M and the corresponding environmental
conditions at the installation site, the temperature of the sensor board may rise to a
relatively high level. However, this does not affect the functionality of the camera. Never
touch the black metal plate of the sensor board directly while the camera is running with
its dome removed.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com