Additional Notes; Weatherproof Qualities; Password For The Administration Menu; Starting The Camera With The Factory Ip Address - Mobotix D24M Manual

134
/146
D24 User Manual: OPERATInG THE CAMERA
3.8

Additional Notes

3.8.1 Weatherproof Qualities

The MOBOTIX D24 IT/Secure models have been certified weatherproof according to IP65
(absolutely dust-proof and resistant to water jets) and can also be wall-mounted outdoors.
The MOBOTIX D24 Basic has attained a protection class of IP54.

3.8.2 Password For The Administration Menu

Accessing the administration menu of the camera (Admin Menu button) is only possible
after entering a user name and password.
• Factory default user name is
• Factory default password is
The Quick Installation assistant automatically appears when the administration menu is
accessed for the first time. It provides an easy method to adjust the basic camera set-
tings to the current application scenario. For security reasons, it is highly recommended to
change the default administrator password after the camera has been properly configured.
Enter the user name and password exactly as shown above. Note that all entries are
case-sensitive.
Make sure that you store information on user names and passwords in a secure
place. If you lose the administrator password and cannot access the Administration
menu, the password can only be reset at the factory. This service is subject to a
service charge!

3.8.3 Starting The Camera With The Factory IP Address

If the camera's IP address is not known, you can start the camera with its factory IP
address. Section 3.2.6 Starting the Camera with the Factory IP Address describes this
procedure in more detail.

3.8.4 Reset The Camera To Factory Settings

All settings of the MOBOTIX camera can be permanently reset to the factory default settings.
This makes sense if, for example, you have obtained a camera without any information
or you would like to reset all settings after testing the camera. In order to perform this
procedure, you need to have access to the administration area of the camera (admins
group). Open Admin Menu > Reset to reset the camera to factory defaults.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
admin
meinsm
Caution
www.mobotix.com • sales@mobotix.com