Mobotix D24M Manual page 86

86
/133
D24 Camera-Manual: InSTALLATIOn
Scope Of Delivery And Required Parts
Please first check that all the components supplied with the Corner and Pole Mount Set
are present in the original packaging.
The Following Additional Tools Are Required For Installation As A Pole Mount:
• Screwdriver Scr Screwdriver
• Materials and tools needed to connect the pre-installed MOBOTIX network cable in
the camera with the on-site network cable.
The Following Additional Tools Are Required For Installation Of The Corner Mount:
• Power drill for screw anchor holes
• Screwdriver Screwdriver Scr
• Scissors to cut out the template
• Pen to mark hole positions
• Materials and tools needed to connect the pre-installed MOBOTIX network cable in
the camera with the on-site network cable
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com