Procedure - Mobotix D24M Manual

D24 Camera-Manual: InSTALLATIOn

2.8.3 Procedure

• Remove the camera outer shell: Remove all four Allen
screws using the supplied Allen wrench and lift off the
outer shell.
• Remove the standard dome: Unscrew the dome from
the housing (counter-clockwise). Package and store the
standard dome for possible use at a later time.
• Aim and adjust the lens: When mounting the camera for the first time, please
proceed to Section 2.11, Aiming And Adjusting The Lens.
• Mount the reinforced dome of the Vandalism Set. Tighten
it in a clockwise direction using a soft cotton cloth. If
necessary, clean the dome with a cotton cloth before
installing it.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
75
/133