Mobotix D24M Manual page 129

MicroSD Card Recording
Activate/Deactivate Full Image Storage In The Browser
To configure this feature, open the Setup Menu > Event Control > Recording dialog and
activate or deactivate the "Full Image Recording" option.
Post-event search in the full image: If you are using Full Image Recording on D24M
cameras, you should use at least MEGA resolution when storing. This will facilitate later
searches in MxControlCenter or MxEasy. The advanced distortion correction features
require this function to deliver satisfactory image quality.
Full Image Recording On: Due to its increased computing power, full image record-
ing reduces the data rate of the live image stream, which may drop by about 10 to 30
percent. It is therefore recommended to reduce the image rate for storage as much as
possible, so as to affect the live image stream as little as possible.
Full Image Recording Off: The event that triggered a video motion (VideoMotion VM)
window may not be in the recorded sequences as the window was not displayed at
the time.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Notes
129
/146