Procedure For D24M Basic - Mobotix D24M Manual

58
/133
D24 Camera-Manual: InSTALLATIOn

2.5.5 Procedure For D24M Basic

1. Unscrew the transparent dome transparent dome of the camera in a
ter-clockwise direction. To keep the dome clean, use the direction. To keep the dome clean, use the
enclosed plastic foil or a lint-free cotton cloth. enclosed plastic foil or a lint-free cotton cloth.
2. Unplug the pre-installed network cable pre-installed network cable
connector inside the camera. Never touch electronic
components as the static electricity may damage them!
3. Loosen the internal part of the camera by releasing the
two blue clamps with the thin side of the hook wrench.
Now turn the toothed ring in a counter-clockwise direction
using the other side of the hook wrench.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
coun- -
from the network from the network
www.mobotix.com • sales@mobotix.com