Mobotix D24M Manual page 53

53
/133
D24 Camera-Manual: InSTALLATIOn
Mx2wire Media Converter (MX-2wire-Set-PW)
The Mx2wire system allows you to set up an Ethernet
network with PoE via two-wire telephone cables of up to
500 m in length. This allows an existing two-wire ana-
log telephone line to be used to connect a 10/100 Mbps
Ethernet device (e.g. PC, WLAN, IP camera, IP telephone
or IP door station). The achievable data rate is up to 30
Mbps. Around 15 Mbps can be reached even with 500 m
of antenna cable.
An identical Mx2wire device is placed at the beginning and
the end of the line. Configuration as sender or receiver is
automatic. The Mx2wire units are supplied with power via
PoE by the feeding network cable. The connected devices
are supplied with up to 7 watt over PoE, as the injected
PoE signal is transmitted parallel to the network signal.
Mx2wire is delivered in the standard wall outlet frame
available in different designs, however, it can also be used
with the on-wall outlet that is included.
Mx2wire Mx2wire
two-wire cable
max. 500 m
PoE out: max. 7 watts
RJ45 RJ45
PoE switch/injector
IEEE 802.3af
TCP/IP
PoE
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com