Mounting The Wall Mount To The Corner And Pole Mount - Mobotix D24M Manual

D24 Camera-Manual: InSTALLATIOn

2.10.5 Mounting The Wall Mount To The Corner And Pole Mount

• Feed the network cables through the appropriate hole
at the back of the Outdoor Wall Mount. The wall seal-
ing on the Wall Mount must be in place already (see
Section 2.9.3).
• Use the 6 x 20 mm Allen screws, Ø 6 mm washers and
M6 nuts included with the Corner and Pole Mount and
attach the Wall Mount to the Corner and Pole Mount.
• Then continue with the remaining work steps described in
Section 2.9.3, Mounting The Camera With The Wall Mount!
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
89
/133