Mobotix D24M Manual page 51

D24 Camera-Manual: InSTALLATIOn
In-Ceiling Set (MX-OPT-IC)
For simple installation in false ceiling tiles.
Suitable for discreet surveillance. Optionally
available with a stainless steel ring.
Outdoor Wall Mount (MX-OPT-WH)
Consists of Outdoor Wall Mount and mounting
supplies. Covers RJ45 flush-mounted sockets.
Space for expansion modules (battery, UMTS,
WLAN, etc.). Easily mounted to poles using
Pole Mount. Weatherproof IP65.
Corner And Pole Mount (MX-OPT-MH)
Flange for Outdoor Wall Mount. Can be
mounted to wall corners or poles. 3 mm
stainless steel, white. Wall Mount may be
ordered separately or as a set.
Tinted Dome (MX-D24M-OPT-DCS)
Suitable for especially bright environments (e.g.
under direct sunlight). A tinted dome reduces
the glare from sunlight by 50% compared
with the standard dome.
network Power Adapter Set (MX-NPA-PoE-Set*)
The Network Power Adapter Set is used to
remotely power the MOBOTIX D24M over
a network cable. This makes it possible to
use the network cable to both connect the
camera and remotely supply power (up to
100 m). The MOBOTIX Network Power Adapter
Set including a power supply with RJ45 con-
nector is required if you are not using a PoE-
compatible switch or router to supply power
to the MOBOTIX camera.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
51
/133
Also suitable for
mounting to drywall
* Country-specific ver-
sions of the set are
available from MOBOTIX