Activate Event Control And Motion Detection; Deactivate Text And Logo Options; Deactivating The Daily Automatic Camera Reboot - Mobotix D24M Manual

Additional Notes
Note: All defined users will be deleted and the admin password will be reset to the factory
default when you reset the camera using Admin Menu > Reset. If you want to maintain
existing users, use the method described in Section 3.2.6 Starting the Camera with the
Factory IP Address .

3.8.5 Activate Event Control And Motion Detection

In its default configuration, the camera's event control and video motion detection features
are not enabled. In order to activate event-controlled recording, open Setup Menu >
General Event Settings and activate the Arming switch. Another method is to click the
Arm & Record softbutton in the browser's user interface. The camera displays the video
motion detection window in the live image (dotted frame in the center) and the camera
automatically stores images as soon as the video motion window detects movements.

3.8.6 Deactivate Text And Logo Options

As the camera arming is deactivated in its default configuration (see preceding section),
the MOBOTIX camera only displays the Text WWW.MOBOTIX.COM, the time stamp and
the MOBOTIX logo at the top of the image. Once the camera arming has been activated,
the text at the bottom of the live image (event, action, messaging and recording symbols)
will also appear.
You can deactivate the status bar at the bottom of the live image and the text bar in the top
left corner by setting Text Display in the Setup Menu > Text & Display Settings dialog to
Off . Setting Text Display to Date & Time will only display the time stamp in the live image.
To hide the logo in the live image, open Admin Menu > Logo Profiles and set Logo
Display to Disable .

3.8.7 Deactivating The Daily Automatic Camera Reboot

Per factory default, the MOBOTIX camera automatically reboots every morning at 3:36 a.m.
The reason for this is that in some rare cases external influences (e.g. radiation in high
locations) can lead to camera malfunctions. The automatic reboot will refresh the camera's
memory and will ensure proper operation without requiring any interaction on the part of
the user. If desired, you can deactivate the automatic reboot of the camera in the Admin
Menu > Time Tasks dialog.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
135
/146
If the dotted rectangle
in the live image is vis-
ible, the camera is armed
Text and logos can
also be deactivated
or customized