Table of Contents
Advertisement
Mounting
Mounting Options
8. Using the supplied Allen wrench
two long Allen screws
9. Connect the camera to the PoE network connection of the building (see
Network, p.
55).
10. Install the bottom plate
n
Use two short Allen screws
rear side of the bottom plate
n
Use two long Allen screws
front side of the bottom plate
11. Push the rubber plugs
Mounting on a Corner (Corner/Pole Mount)
CAUTION! Before mounting the camera, make sure that a network connection with power supply according
to the PoE Plus (802.3at-2009) standard is available at the mounting position (see
to the
Network).
48 / 72
W.2, p.
20, secure the camera to the bottom plate of the Wall Mount with
W.5, p. 20
and one washer
W.2, p. 20
with the camera in the Wall Mount:
W.4, p. 20
with one washer
①
.
W.5, p. 20
with one washer
②
.
M.7, p. 19
into the screw holes of the camera (
W.6, p. 20
each.
W.6, p. 20
W.6, p. 20
each to secure the camera on the
①
Connecting the Camera to the
each to secure the camera on the
②
and
in the figure above).
Connecting the Camera
Advertisement
Table of Contents
