Mounting The Wall Mount To The Corner And Pole Mount - Mobotix D26 Dome Manual

D26 Camera Manual: Installation

2.7.4 Mounting the Wall Mount to the Corner and Pole Mount

•
•
•
62
Feed the network cables through the appropriate hole
at the back of the Outdoor Wall Mount. The wall sealing
on the Wall Mount must be in place already.
Use the 6 x 20 mm Allen screws, Ø 6 mm washers and
M6 nuts included with the Corner and Pole Mount and
attach the Wall Mount to the Corner and Pole Mount.
Continue with the remaining work steps as described in
Section 2.6, «Installing the Wall Mount»!