Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Most Active AP
The Most Active AP page displays a visual representation of the wireless network traffic with
the location of the access points.
To add a new map representation:
1.
Click
+
to open the Create Map of Most Active APs window. Enter a name in the Map
Name field.
2.
Upload the location map by dragging and dropping an image (supported image
formats: PNG and JPG; max. size: 10M) or browsing your local folder to select an image.
Click the Select AP menu to select an AP from the list of available APs. Drag the AP to
3.
place it on the right spot.
4.
Click Save to save your changes and update the settings on the screen.
Available maps can be edited or deleted by clicking
Mouse-over an AP to obtain the following information about it: Device Name, IP Address,
MAC Address, Location, Unique Clients, and Traffic Usage.
To view an active map report, select a date and time from the past 7 days, then click
view the report.
If an AP on the map is active during the selected time, it will be colored with a number on it
indicating the number of connected clients. Different colors represent the high or low
amount of traffic. The two numbers in the upper-right corner of the page show the following
information:
1.
Unique Client Average/High: The average number/the highest number of connected
clients.
2.
Traffic Usage Average/High: The average amount/ the highest amount of traffic in MB.
Once a report has been generated, lick
or
.
to export it as a pdf file.
78
AP Network
to
Advertisement
Table of Contents
