Advanced System Configuration Submenu - Fujitsu primergy TX150 User Manual

8.2.8 Advanced System Configuration Submenu

Use this menu to configure the settings which are related to CPU, memory and USB.
Main Advanced
Advanced System Configuration
ECC Memory Checking:
PCI Bus Parity Checking:
BIOS Work Space Location:
Hyper-Threading:
Limit CPUID functions:
CPU Mismatch Detection
CPU Halt Mode(C1E):
NX Memory Protection:
CPU Timeout Counter
Enhanced SpeedStep:
CPU MC Status Clear:
Discard Timer Mode:
F1 Help
Esc Exit
Item
ECC Memory Checking
PCI Bus Parity Checking
BIOS Work Space Location
Hyper-Threading
Limit CPUID functions
CPU Mismatch Detection
CPU Halt Mode (CIE)
CPU Thermal Management
NX Memory Protection
Security Server
[Enabled]
[Enabled]
[Top of Base Memory]
[Enabled]
[Disabled]
[Enabled]
[Standard]
[Disabled]
[Enabled]
[Disabled]
[Next Boot]
[1024 clocks]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Advanced System Configuration Submenu
Setting
Enabled (Unchangeable)
Enabled (Unchangeable)
Top of Base Memory
(Unchangeable)
• Disabled
• Enabled (Initial value)
Disabled (Unchangeable)
Enabled (Unchangeable)
• Standard (Initial value)
• Enabled
• Standard (Initial value)
• Enabled
• Disabled (Initial value)
• Enabled
PRIMERGY TX150 S4 User's Guide
Exit
Item Specific Help
If all memory in the
systm supports parity
(x72) this selections
enables ECC mode.
Mod. Defaults
F9
Previous Values
Sub-Menu F7
Description
Sets whether to enable or disable to check ECC
error of memory.
Sets whether to enable or disable the PCI bus parity
checking.
Sets the location on the memory to assign the data
area that BIOS uses.
Sets whether or not to run one CPU as a dual-
processing CPU. The setting [Enabled] may
enhance processing performance by allowing
maximum use of the processor resources.
This item is displayed only when Intel Pentium 4
processor is installed.
Sets whether or not to limit CPUID expanded
function. If the OS does not support expanded
function, the system may not start.
Sets whether to enable or disable checking the CPU
type and frequency.
Configures the CPU internal setting.
This item is displayed only when Intel Pentium 4
processor is installed.
Configures the CPU internal setting. This item is
displayed only when Intel CeleronD processor is
installed.
Sets whether to enable or disable "execute disable
bit function" of processor.
8
227