Main Menu - Fujitsu Primergy RX100 S3 User Manual

8.1.2 Main Menu

The [Main] menu is initially displayed when you start the BIOS Setup Utility.
Settings for time and date and for the drives are configured on the [Main] menu.
Main Advanced
System Time:
System Date:
Standard IDE:
Boot Options
Base Memory:
Extended Memory:
F1 Help
Exit
Esc
Item
System Time
System Date
Standard IDE
Boot Options
Base Memory
Extended Memory
Security Server
[HH:MM:SS]
[MM/DD/YYYY]
[GCR-8483B-(PM)]
640K
***M
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Main Menu
Setting
Present time
Present date
Sets the type and operating mode for connected IDE devices.
Press the [Enter] key to display the "8.1.3 Standard IDE Submenu" ( pg.206)
window.
Sets system startup options. Press the [Enter] key to display the "8.1.4 Boot
Options Submenu" ( pg.207) window.
A usable base memory size of less than 1MB appears.
A memory size of more than 1MB appears.
PRIMERGY RX100 S3 User's Guide
Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9 Setup Defaults
Sub-Menu F7 Previous Values
Description
The system time is set in "hours:minutes:seconds"
format. The hours should be based on a 24-hour clock.
For example, 6:30:00 P.M. is set as "18", "30", "00".
If a highly precise system time is necessary, install a
network synchronized time system (NTP, etc.).
Note:
Repeat the procedure until the correct time is set.
If a highly precise system time is necessary, install
a network synchronized time system (NTP, etc.).
The system date is set in "month:day:year" format.
For example, September 20, 2005 is set as "09", "20",
"2005".
8
205