Lan Driver Advanced Setup [Bacs]; Bacs Installation - Fujitsu PRIMERGY TX200 S2 User Manual

5.6 LAN Driver Advanced Setup
[BACS]
BACS is an integrated GUI application consisting of programs such as BASP
(Broadcom Advanced Server Program) that provides the load balancing feature, etc.,
by teaming up multiple adapters. BACS is used in the following situations:
• Setup a VLAN using the onboard LAN
• Perform the other advanced setups of the onboard LAN
Use of Intel® PROSet
®
Use Intel PROSet ( pg.160) to perform the following advanced setups of a LAN card:
• Use the Teaming function between LAN cards or between a LAN card and the onboard LAN
• Setup a VLAN using a LAN card
• Use the Jumbo frame with a LAN card
• Perform the other advanced setups of a LAN card

5.6.1 BACS Installation

If the OS was installed using ServerStart, "BACS" is already installed with the driver. If the OS was
installed manually, BACS will not be installed.
If [Broadcom Control Suite] is not displayed in the [Control Panel], install BACS according to the
following installation procedures:
1
Start the following EXE file contained in the ServerStart CD-ROM.
[CD-ROM drive]: \PROGRAMS\GENERAL\Broadcom\MAforS2\setup.exe
The installer starts up.
PRIMERGY TX200 S2 User's Guide
5
157