Leaf Spring Installation - Club Car Precedent 2004 Maintenance And Service

9
REAR SUSPENSION

LEAF SPRING INSTALLATION

1. To install the springs, reverse the removal procedure. See following CAUTION.
CAUTION
• When positioning the spring on the transaxle, be sure to insert the locating bolt on the spring
in the locating hole in the transaxle saddle.
2. Tighten the nuts on the U-bolts to 35 ft-lb (46.5 N·m).
3. Tighten nuts (2) on spring mounting bolts (17) to 18.4 ft-lb (25 N·m) (Figure 9-1, Page 9-2).
Page 9-4 2004 Precedent IQ System Golf Car Maintenance and Service Manual
Leaf Springs