Monitoring Dhcp - Juniper J-Series Administration Manual

Table 75 on page 143 summarizes key output fields in NAT displays.
Table 75: Summary of Key NAT Output Fields
Field Values
NAT Pools
NAT Pool Name of the NAT pool.
Pool Start Address Lower address in the NAT pool address range.
Pool Address End Upper address in the NAT pool address range.
Port High Upper port in the NAT pool port range.
Port Low Lower port in the NAT pool port range.
Ports In Use Number of ports allocated in this NAT pool.

Monitoring DHCP

A Services Router can operate as a DHCP server. To view information about dynamic
and static DHCP leases, conflicts, pools, and statistics, select Monitor>DHCP in the
J-Web interface or enter the following CLI commands:
In addition, you can display the globally configured DHCP settings by using the
system services global
Table 76 on page 143 summarizes the output fields in DHCP displays.
Table 76: Summary of DHCP Output Fields
Field Values
DHCP Leases
Allocated List of IP addresses the DHCP server has assigned to
Address clients.
MAC Corresponding media access control (MAC) address
Address of the client.
show services nat pool
show system services dhcp binding
show system services dhcp conflict
show system services dhcp pool
show system services dhcp statistics
command from the CLI.
Chapter 7: Monitoring the Router and Routing Operations
Additional Information
Using the Monitoring Tools
show
143