Juniper J-Series Administration Manual page 228

J-series Services Router Administration Guide
To modify the encryption key:
1.
2.
3.
4.
206
Encrypting and Decrypting Configuration Files
Enter operational mode in the CLI.
To configure a new encryption key in EEPROM and determine the encryption
process, enter one of the
request system set-encryption-key
in Table 103 on page 204. For example:
user@host> request system set-encryption-key
Enter EEPROM stored encryption key:
At the prompt, enter the new encryption key. The encryption key must have at
least 6 characters.
Enter EEPROM stored encryption key:juniperone
Verifying EEPROM stored encryption key:
At the second prompt, reenter the new encryption key.
commands described