Juniper J-Series Administration Manual page 172

J-series Services Router Administration Guide
Table 78: Summary of Key PPPoE Output Fields (continued)
Field Values
Packet Type Packets sent and received during the PPPoE
session, categorized by packet type and packet
error:
PADI
packets.
PADO
packets.
PADR
packets.
PADS
Session-Confirmation packets.
PADT
packets.
Service Name Error
Service-Name request could not be honored.
AC System Error
access concentrator experienced an error in
processing the host request. For example,
the host had insufficient resources to create
a virtual circuit.
Generic Error
unrecoverable error occurred.
Malformed Packet
packets that caused the packet handler to
disregard the frame as unreadable.
Unknown Packet
Sent Number of the specific type of packet sent from
the PPPoE client.
Received Number of the specific type of packet received by
the PPPoE client.
Timeout Information about the timeouts that occurred
during the PPPoE session.
PADI—Number of timeouts that occurred for
the PADI packet.
PADO—Number of timeouts that occurred
for the PADO packet. (This value is always
and is not supported.
PADR—Number of timeouts that occurred
for the PADR packet.
Sent Number of the timeouts that occurred for PADI,
PADO, and PADR packets.
PPPoE Version
Maximum Sessions Maximum number of active PPPoE sessions the
Services Router can support. The default is 256
sessions.
150
Using the Monitoring Tools
—PPPoE Active Discovery Initiation
—PPPoE Active Discovery Offer
—PPPoE Active Discovery Request
—PPPoE Active Discovery
—PPPoE Active Discovery Terminate
—Packets for which the
—Packets for which the
—Packets that indicate an
—Malformed or short
—Unrecognized packets.
Additional Information
0